Walnut
Juglans nigra
General Description
The sapwood of walnut is creamy white, while the heartwood is light brown to dark chocolate brown, occasionally with a purplish cast and darker streaks. Walnut is usually supplied steamed, which darkens the sapwood, but a very unique look can also be achieved by leaving it natural. The wood is generally straight grained, but sometimes with wavy or curly grain that produces an attractive and decorative figure. The dark heartwood will lighten in colour as it ages overtime with exposure to UV light.
Distribution & Availability
Throughout Eastern USA, but principal commercial region is the central United States. One of the few American species planted as well as naturally regenerated. Reasonable availability in both lumber and veneer.
Physical & Mechanical Properties
Walnut is a tough, hard timber of medium density, with moderate bending and crushing strengths and low stiffness. It has a good steam bending classification.
Working Properties
Walnut works easily with hand and machine tools, and nails, screws and glues well. It holds paints and stains very well and can be polished to an exceptional finish. It performs best when dried slowly, reducing the opportunity for degrade. Walnut has good dimensional stability.
Main Uses
Furniture, cabinet making, architectural interiors, high class joinery, doors, flooring, gunstocks and panelling. A favoured wood for using in contrast with lighter coloured timbers.
Other Information
The NHLA grades have been altered for this species because of availability and nature of the timber growth (around 1% of the standing forest resource). The FAS lumber grade allows a 5 inch minimum width and 6 foot minimum length. When steamed, the sapwood, which is not considered a defect, will turn a darker colour to assist blending in the finishing process and is admitted without limit. Discuss with your supplier for more information.
